VAL 175 is a thermoforming and filling machine (FFS) designed for producing single-dose containers formfilled in laminated plastic sheets in which the whole company know-how has been put in: thanks to the easy access of this machine the format changeover from 1 to 300 ml is really fast and convenient to clean. VAL175 has been designed for cosmetic, chemical, pharmaceutical and food industry.
VAL 175 is an all-around machine conceived for medium and large production: it can manufactures unit-dose and vials with or without flat bottom (stand-up). Its scope can vary from the coupling of a single folded film to the coupling of 2 plastic films or of one plastic film and one aluminum film (peelable). VAL 175 employs a mechanics combined with a cuttingedge electronic control both for the operator interface and the internal motion management. It is equipped with a Siemens touch screen operator panel, with a display of 10” fitted for remote control.
The machine motion is possible thanks to a pneumatic-mechanical handling system controlled by Profinet modules, with cycles that can be adapted to the specific requirements of a product as well as a very short changeover times.
|Type||Vertical Thermoforming-Filling Machine|
|Sector of application||chemical, pharmaceutical, cosmetic, food|
|Dimensions||5880x2320x1730 mm (machine width without trolley 1460 mm)|
|Hourly production||30 cycles / 1’|
|Filling capacity||from 0.2 to 300 ml|
|Used material||PVC/PE, PET/PE, PVC/PVDC/PE, PET/EVOH/PE, PP/PET/EVOH/PE, ACLAR/PET/PE, PS/PE, PP/PE, PCTFE/PET/PE/EVOH/PE, PP/COC/PP/PE, PP/COC/EVOH/PP, plastics laminated coupled with Aluminium or Paper|
|Machine pitch||175 mm|
|Movement system||pneumatic and mechanic|
|Movement system control||Pneumatic / Profinet modules|
|Building materials||Stainless steel AISI 304 + ERGAL 55|
|Installed power||25 Kw|
|Air consumption||500 NL/1’|
|Water consumption||25 L/1’|
|Water pressure||2 bar|
|Air pressure||7 bar|